">
Gastric bypass surgery performed by remote control
December 10, 2021 · Uncategorized · (No comments)

Sunday, August 21, 2005

A robotic system at Stanford Medical Center was used to perform a laparoscopic gastric bypass surgery successfully with a theoretically similar rate of complications to that seen in standard operations. However, as there were only 10 people in the experimental group (and another 10 in the control group), this is not a statistically significant sample.

If this surgical procedure is as successful in large-scale studies, it may lead the way for the use of robotic surgery in even more delicate procedures, such as heart surgery. Note that this is not a fully automated system, as a human doctor controls the operation via remote control. Laparoscopic gastric bypass surgery is a treatment for obesity.

There were concerns that doctors, in the future, might only be trained in the remote control procedure. Ronald G. Latimer, M.D., of Santa Barbara, CA, warned “The fact that surgeons may have to open the patient or might actually need to revert to standard laparoscopic techniques demands that this basic training be a requirement before a robot is purchased. Robots do malfunction, so a backup system is imperative. We should not be seduced to buy this instrument to train surgeons if they are not able to do the primary operations themselves.”

There are precedents for just such a problem occurring. A previous “new technology”, the electrocardiogram (ECG), has lead to a lack of basic education on the older technology, the stethoscope. As a result, many heart conditions now go undiagnosed, especially in children and others who rarely undergo an ECG procedure.

Retrieved from “https://en.wikinews.org/w/index.php?title=Gastric_bypass_surgery_performed_by_remote_control&oldid=4331525”
December 10, 2021 · Health · (No comments)

Irritation and compression of the nerve cause sciatica pain. It mainly disturbs only a single part of the body but tends to transfer to other parts of the body over a period of time. This pain normally spreads from the lower back to the rear thigh and further extends down the leg.

Major symptoms of sciatica pain include; burning, shooting pain, numbness, tingling down the legs, and weakness in the affected leg that causes difficulty in sitting down or standing up.

No doubt, there are many conventional sciatica nerve treatment methods available right now, but they only ease the pain for a limited time. Apart from this, steroid injections are also available for sciatica nerve treatment but can cause adverse effects as well.

Today, we are going to discuss some home remedies and natural therapies with you, through which you can reduce the inflammation and pressure on the disturbed sciatic nerve. The top home remedies forsciatica nerve treatment are discussed here as under:

  1. Hot and cold compresses: Using the hot and cold pack can provide some relief from severe pain and irritation. The process to use this pack is:
  • Place the hot then cold pack on the affected area for 20 minutes.
  • Repeat the same process after every one hour until you feel some relief from the pain.
  1. Turmeric: This is another natural and effective remedy forsciatica nerve treatment because turmeric has anti-inflammatory properties, which help in getting relief from the pain. The compound called curcumin contained in turmeric helps relieve pain and inflammation.
  • Add a teaspoon of turmeric powder to a hot cup of milk. Boil it properly and drink it twice a day until you notice an improvement. If needed, you can add honey to sweeten the milk.
  • Another alternative is to have 250 to 450mg of turmeric supplement three times a day, but you must consult a doctor before starting taking it.
  1. Capsaicin cream: This cream contains a pain reliever called capsaicin, which helps in depleting the level of a substance called P that transfers the pain signal. Buy the cream from the market containing 0.025% to 0.075% capsaicin. Apply it to the afflicted area four times a day for at least one week.
  2. White willow bark: This home remedy is used to get relief from long-lasting pain. The White yellow bark contains glycosides with salicin that contributes to anti-inflammatory and analgesic properties. Take the dosage as prescribed by the doctor.
  3. Fenugreek seeds: For sciatica nerve pain, a powder prepared from the fenugreek seeds also acts as a great pain reliever. This powder is also helpful to get relieved from pains like gout and rheumatoid arthritis.
  • Grind a small quantity of Fenugreek seeds.
  • Mix it with enough milk so as to get a soft paste.
  • Apply the paste to the affected area and leave it for more than two hours.
  • Wash it off.
  • Repeat the same process daily until you see some signs of improvement in pain.
  1. Massage: This also comes under sciatica nerve treatment. Massage helps in mitigating the pain caused due to muscle contraction. Moreover, it helps in releasing the tension and encourages circulation inside the nerves. You can visit a massage parlor for taking a massage or buy the best massage chair consumer reports to enjoy massage in the comfort of your home.
">
Indonesian parliament approves privatising of three major state firms
December 9, 2021 · Uncategorized · (No comments)

Saturday, September 20, 2008

The parliament of Indonesia has approved government plans to make an Initial Public Offering (IPO) of shares in three major state-owned firms, privatising them. They are steelmaker Krakatau Steel, Bank Tabungan Negara (BTN) and national flag carrier Garuda Indonesia.

The parliament has left the process fully in the hands of the government, and has set the maximum stake to be sold at 30% for BTN and Krakatau, and 40% for Garuda. Although Indonesia has been known to fund budget deficits with privatisation, the intention is for the funds from this scheme to go to the businesses themselves to allow expansion.

Krakatau expects 3.2 trillion Rupiah (IDR) from the sale, while the estimated price for their stock is between IDR3 and IDR4 trillion (321 – 428 million USD). Both ArcelorMittal SA, the biggest steelmaker in the world, and BlueScope Steel Ltd, the largest in Australia, have expressed an interest in the IPO. Krakatau will use the funds to help finance an expansion scheme which aims to have production doubled to five million tonnes in 2011.

BTN, which focuses on home owner loans, has set itself a target income of IDR36.12 trillion (3.86 billion USD) in 2010 compared to a projected IDR22.9 trillion ( 2.45 billion USD) this year. Net profit for this year is projected at IDR472 billion (50.5 million USD)and is hoped to rise to IDR1.39 trillion (148.7 million USD) in 2010. The bank’s loan to deposit ratio is predicted to rise from 105.05% this year to 144.93% in 2012. BTN hopes to conduct its IPO before the end of 2008.

HAVE YOUR SAY
Is the Indonesian government right to keep majority holdings?
Add or view comments

Garuda is not quite 100% state-owned to start with, unlike the other two, but is very close with 95.44% of the company belonging to the government. Like all of Indonesia’s 51 airlines, Garuda is on the list of air carriers banned in the EU due to safety concerns raised after a string of air accidents in the nation. Garuda expects to raise IDR4.2 trillion (449.4 million USD) in funds from the IPO, and will use IDR2.5 trillion (267.5 million USD) to pay off its debts and invest IDR1.7 trillion (181.9 million USD) in new aircraft.

The government is still working to get a deal to make IPOs for architectural firm Yodya Karya and three plantation firms called Perkebunan Nusantara III, IV and VII.

Retrieved from “https://en.wikinews.org/w/index.php?title=Indonesian_parliament_approves_privatising_of_three_major_state_firms&oldid=1100303”
">
Wikinews interviews Kent Mesplay, Green Party presidential candidate
December 9, 2021 · Uncategorized · (No comments)

Sunday, June 29, 2008

While nearly all coverage of the 2008 Presidential election has focused on the Democratic and Republican candidates, the race for the White House also includes independents and third-party candidates. These prospects represent a variety of views that may not be acknowledged by the major party platforms.

Wikinews has reached out to these candidates throughout the campaign. We now interview Green Party Presidential candidate Dr. Kent Mesplay.

Why do you want to be President?

I run for president to help improve society, pointing out that we are more secure when we live in a sustainable manner. As of this writing our culture is based on the consumption of limited materials such as petroleum, coal and uranium with great emphasis placed on the consumption of “goods” that are produced and purchased with little regard for the well-being of future generations. Government, ideally, provides an independent, objective forum through which solutions to the needs and wants of our time can be raised, discussed and implemented in a thoughtful, respectful manner. In contrast to this ideal, our current central, national government exists largely to protect and preserve the status quo of relatively few stake-holders, having undue political influence and acting in a manner not in the best interest of the majority of people. We cannot blindly consume our way to peace and stability.
A Green presidential administration would put the needs of current and future generations above the rude demands and expectations of the well-heeled political donor class. It is not important that we have a new president bearing the face of change. We need vital, core change to our political institutions to decentralize control, empower rational science-based decision-making and cut the damaging influence of corporate money on public policy. This change is unlikely to arise from within the current two political parties that are intrinsically corrupted by the ubiquitous “greased-palm” bribing handshake with corporate entities. We need to only ask how many corporate media conglomerates regularly advertize the question, “Should a corporation have the legal status of a super-person?” to realize the extent of the current dilemma. A corporation should never have been considered to have the legal rights of an individual. The Green Party is independent from business interests. This political arm of the environmental, peace and justice movements represents meaningful change to public policy and to our fragile, centralized, short-sighted way of life.
Green solutions are largely local solutions: more community gardens and small farms, reasonable use of fresh water, grey-water and waste-water, including more water storage and community responsibility for the entire water stream, energy-efficient housing and transportation, health care for all, protecting besieged ecosystems. Practically, what this means is a higher base-line of essential services with the costs shared and supported broadly. To be clear, our basic physical security deserves support, not gaming at the hands of profiteers. A common wealth for all citizens is possible, with local regional flavors in commerce and culture atop this “baseline” of security. To be danced out of the way, one finds the current heavy-handed players of agribusiness, pharmaceuticals, energy, insurance and the congressional-military-industrial complex all dependent upon “corporate socialism” for subsidies and protection from real, meaningful, positive change and shielded from probing questions as to why, for example, we so frequently go to war.
Mottos include “sustainability is security” and “freedom to debate.” I run to help define, popularize and grow the Green Party, to be an advocate for: single-payer health-care, renewable energy, increased energy efficiency, rail transport, organic local agriculture, indigenous rights, wise water use, banning lobbying/bribery, over-turning the legal fiction that a corporation is a person, and equal media exposure for all political candidates, having open debates between all political parties and beating those “swords into plowshares” by focusing on improving diplomacy, communication and basic physical security in water, food and energy in particular to mitigate the negative effects of global climate change and to provide emergency readiness. Also, I get bored easily and this keeps me busy.

Have you ever run for political office before? (President, senate, congress, city councillor, school trustee… etc.) Have you ever been a member of a political party, other than the one you’re currently in?

I ran for president in 2004 and 2008, being one of the four “finalists” at the nominating conventions. Also, I ran for U.S. Senate in California as part of a contested race in the Green Party Primary Election in 2006. I plan to run for U.S. Congress in 2010 and I am now taking the steps to begin running for the 2012 presidential race. I have been a member of both main U.S. parties and I cannot adequately express my disgust for them both. I encourage people everywhere to register Green, vote Green and support Green Party efforts at achieving and maintaining ballot access within the current hostile political environment. Ideally, we can together displace one of the two major parties; such is the near-majority level of disapproval of the antiquated mainstream parties and the desire for a true alternative.

Have you ever campaigned for another political candidate?

In 1996 I helped organize a press conference for then-presidential candidate Ralph Nader, after having helped support efforts to draft him as a candidate.

What skills or ideas do you bring from this position, or previous positions, that will benefit the Oval Office?

I believe in the separation of power within government, including economic power. Due to the influence of money in politics and within government we do not have a political system that works well to advance the needs and concerns of “we the people.” There are few, muted voices within our government supporting the dispossessed, the disenfranchised, the “left out,” the lower echelon within our socio-economic strata. Especially now, with high energy costs, questionable food supplies, shredded social safety nets, job loss due to outsourcing and other losses, loss of civil liberties and rights, the consolidation and concealment of governmental power, the “fascist” confluence of military-industrial business with governmental power, threats of unstable weather, retaliation by terrorists and opportunistic foreign governments following our model it is a good time to not be silent. I have lived with and among many different cultures, religions and peoples, I have a multi-cultural background and a mixed ancestry, I value art, music and science, I am both intuitive and analytical and I enjoy solving problems. Our nation would benefit greatly from my services. Plus, I am not “on the take.”

Campaigning for the American presidency is one of the most expensive exercises in the world. How do you deal with the cost and fundraising?

Small contributions from many people not expecting a return of favors approximates public funding of campaigns. In order to “get the word out” about my existence as a candidate it is necessary to adapt and adopt alternative, low-cost strategies. With my campaign team steadily growing I anticipate utilizing modern low-cost communication methods to help “spread the word.” Fund-raising is among the least palatable activities that I have to endure as a candidate and I will be the first to admit that I have done very little fundraising. The reader who is a U.S. Citizen of voting age is encouraged to support my candidacy by visiting my web site, www.mesplay.org, and making a small donation in accordance with Federal Election Commission guidelines. Also, simply e-mailing friends helps tremendously with these small campaigns.

What are you/were you looking for in a running mate?

My running mate would likely represent a demographic that I do not, such as being female and non-white, since I am a white male. As to character and experience, I would want to be supported by someone with great practical public experience who has remained in integrity with the original idealistic hopes and dreams that once drew them into the public eye or political arena.

Can you win the 2008 Presidential election?

I can win the 2008 presidential election by becoming the Green nominee, by inspiring otherwise non-voters to register Green and to grow Green Parties in those states where they are not yet granted ballot access and to subsequently vote in some creative, time-urgent manner circumventing the severe limitations put on candidates and parties by the secretaries of state through the country. I would have to win many of the states where the Green Party is on the ballot and I would have to find a manner allowing erstwhile green voters to legally vote in those states where we are not on the ballot.

If you can’t make it into the Oval Office, who would you prefer seeing taking the presidency?

I cannot support candidates who foolishly support nuclear power and weapons, who do not recognize the need for peace and who do not offer real, meaningful, substantive systemic change.

What should the American people keep in mind, when heading to the polls this November?

When heading for the polls this November U.S. citizens should support Green Party candidates, policies and values. Thank you.
This article features first-hand journalism by Wikinews members. See the collaboration page for more details.
This article features first-hand journalism by Wikinews members. See the collaboration page for more details.

Retrieved from “https://en.wikinews.org/w/index.php?title=Wikinews_interviews_Kent_Mesplay,_Green_Party_presidential_candidate&oldid=4635253”

Signs That Your Car Needs New Brake Pads Montgomery, Tx

December 8, 2021 · Networkings Solutions · (No comments)

byAlma Abell

Unfortunately, car owners often ignore proper maintenance of their brake pads which can have potentially disastrous results. It is important that your breaks are in the best possible condition. If you have no idea how to tell whether or not you need new brake pads Montgomery TX, there are a couple of things that you should look out for. One such sign that you need new brakes is a pulsating brake pedal. This is usually a vibrating or grabbing feeling when the brakes are applied. This can point to worn out brake pads, which may need to be re-machined or replaced entirely depending on the severity of the wear.

Another good way to tell that it is time to change your brake pads is if you hear a clicking noise when the brakes are applied. There is a special device that is installed by car manufacturers that prevents the rattling noise. Once this is noticed, it could point to worn out brakes which should be replaced as soon as possible. There is a good chance that you may need to get new brake pads rather than a simple re-machine remedy.

You can also visibly check your brake pads to see if they need replacing. This is a non-intrusive process that doesn’t require any tools. Looking through the wheel spokes should reveal the brake pad attached to the rotor. At least a ¼ inch of it or more should be visible. If this is not the case, it means that the pads are too thin, and therefore require to be replaced.

Lastly, listen for a screeching sound when the brakes are applied to tell what condition the brake pads are in. A high-pitched screech indicates that it is time to change the brakes. This sound is as a result of fully depressed brakes, and requires immediate attention. Although the pitch may vary, the sound indicates one thing, worn out brake pads. In any of these cases, you will need genuine and quality brake pads Montgomery TX. You can find these at Discount Brake & Auto Repair. Visit website here to learn more about brake pads and how you can acquire new ones for your car.

Gastric bypass surgery performed by remote control

">
Gastric bypass surgery performed by remote control
December 7, 2021 · Uncategorized · (No comments)

Sunday, August 21, 2005

A robotic system at Stanford Medical Center was used to perform a laparoscopic gastric bypass surgery successfully with a theoretically similar rate of complications to that seen in standard operations. However, as there were only 10 people in the experimental group (and another 10 in the control group), this is not a statistically significant sample.

If this surgical procedure is as successful in large-scale studies, it may lead the way for the use of robotic surgery in even more delicate procedures, such as heart surgery. Note that this is not a fully automated system, as a human doctor controls the operation via remote control. Laparoscopic gastric bypass surgery is a treatment for obesity.

There were concerns that doctors, in the future, might only be trained in the remote control procedure. Ronald G. Latimer, M.D., of Santa Barbara, CA, warned “The fact that surgeons may have to open the patient or might actually need to revert to standard laparoscopic techniques demands that this basic training be a requirement before a robot is purchased. Robots do malfunction, so a backup system is imperative. We should not be seduced to buy this instrument to train surgeons if they are not able to do the primary operations themselves.”

There are precedents for just such a problem occurring. A previous “new technology”, the electrocardiogram (ECG), has lead to a lack of basic education on the older technology, the stethoscope. As a result, many heart conditions now go undiagnosed, especially in children and others who rarely undergo an ECG procedure.

Retrieved from “https://en.wikinews.org/w/index.php?title=Gastric_bypass_surgery_performed_by_remote_control&oldid=4331525”

Gastric bypass surgery performed by remote control

">
Gastric bypass surgery performed by remote control
December 6, 2021 · Uncategorized · (No comments)

Sunday, August 21, 2005

A robotic system at Stanford Medical Center was used to perform a laparoscopic gastric bypass surgery successfully with a theoretically similar rate of complications to that seen in standard operations. However, as there were only 10 people in the experimental group (and another 10 in the control group), this is not a statistically significant sample.

If this surgical procedure is as successful in large-scale studies, it may lead the way for the use of robotic surgery in even more delicate procedures, such as heart surgery. Note that this is not a fully automated system, as a human doctor controls the operation via remote control. Laparoscopic gastric bypass surgery is a treatment for obesity.

There were concerns that doctors, in the future, might only be trained in the remote control procedure. Ronald G. Latimer, M.D., of Santa Barbara, CA, warned “The fact that surgeons may have to open the patient or might actually need to revert to standard laparoscopic techniques demands that this basic training be a requirement before a robot is purchased. Robots do malfunction, so a backup system is imperative. We should not be seduced to buy this instrument to train surgeons if they are not able to do the primary operations themselves.”

There are precedents for just such a problem occurring. A previous “new technology”, the electrocardiogram (ECG), has lead to a lack of basic education on the older technology, the stethoscope. As a result, many heart conditions now go undiagnosed, especially in children and others who rarely undergo an ECG procedure.

Retrieved from “https://en.wikinews.org/w/index.php?title=Gastric_bypass_surgery_performed_by_remote_control&oldid=4331525”

The Right Excavator Bucket To Suit Your Digging Needs}

December 5, 2021 · Civil Excavation And Demolition Services · (No comments)

The right excavator bucket to suit your digging needs

by

LisaEveryone knows that excavators are of greatest use in digging trenches and clearing debris. They have great use in the construction industry as well as in the infrastructure building industries. Now, an excavator without its tools is toothless. Therefore, you need the various kinds of excavator buckets, ripper products, etc to supplement the functioning of the excavators. Each tool has a specific use. Using the right kind of tool is important to ensure optimum success. In the previous article we had seen the use of the excavator buckets depending in the type of soil. In this article we shall see the selection of the right kind of excavator buckets to suit your digging needs.There are many kinds of excavator buckets available in the industry. However, they broadly come under the three categories, trenching, ditching, and angle tilt buckets.Digging trenches is the major work of the excavator machine. Using the right kind of excavator buckets, you are able to dig narrow or deep trenches. The important point to note is that you have to maintain excellent breakout force and adhere to the perfect cycle times for the excavator. Such excavator buckets have to be strong to bore through the soil as well as flexible enough to lift the debris and deposit them by the sides. This involves the extended use of the excavator arm. A skillful operator can do a great job.Ditches can be different from trenches in many ways. These buckets are different from the standard buckets you use for trenching activities. They have unique shapes such as the trapezoidal excavator bucket, etc. These buckets have smooth exteriors as the main objective is to build the ditch and ensure that the soil does not cave in again after the job is over. They have to smooth out the sides of the ditch in order to ensure a perfect job. You need these buckets to have a lifting eye for clearing the debris. Such buckets have weld-on side cutters and a reversible bolt-on cutting edge. This enables the machine to ensure that the work area has a smooth finish after the job of digging the ditch is over. Excavators have great use in land clearing operations. You see landslides in various mountainous areas. These landslides can bring with them mud and rocks hurtling down from the mountains. They can block roads and destroy homes on the way. Clearing this debris requires the use of excavators with special type of tilting buckets. You cannot expect the debris to be flat. Naturally, they will be in a haphazard fashion. The angled buckets can work at 45 degrees whereby clearing the debris becomes easy for the excavator. You need these machines to be able to adjust the tilting speed while having adequate auxiliary flow control valves. The main objective of the tilting buckets is to ensure that you need not move the excavator to suit the angle of the debris. Tilting the buckets is enough for clearing the area and ensuring a smooth finish.

Lisa is the author of this article on

[youtube]http://www.youtube.com/watch?v=RAGfZ2vurFI[/youtube]

bucket teeth and adapter

. Find more information, about

Side cutter and protector

here

Article Source:

eArticlesOnline.com}

Fishermen find body of child killed by Chile tsunami in Pichilemu

">
Fishermen find body of child killed by Chile tsunami in Pichilemu
December 4, 2021 · Uncategorized · (No comments)

Sunday, March 21, 2010

Pichilemu, Chile — Pichileminian fishermen found the body of a child on Sunday evening on the beach of Pichilemu. It is another victim of the earthquake and tsunami combo that hit Pichilemu, and many other areas of Chile, in February 27, and later, the March 11 Pichilemu earthquake.

The fishermen were roaming around the coastline, in Chorrillos, when at the 1:00 PM (17:00 UTC) they found the body of a person. They immediately called the police. The Fiscal of Pichilemu, Pablo Muñoz, asked for the presence of the Investigations Police.

The cadaver was moved to the Morgue of the Pichilemu Hospital, where it is being examined. It is known that the child was between three and six years old. The body will be taken to the Servicio Médico Legal in Rancagua, where it will can be identified.

The police believe that the body might belong to one of the persons that disappeared in the tsunami of the rural area of Chorrillos, when two children and an adult were missing.

 This story has updates See Body of child killed in tsunami identified by Chilean police 

Retrieved from “https://en.wikinews.org/w/index.php?title=Fishermen_find_body_of_child_killed_by_Chile_tsunami_in_Pichilemu&oldid=4377249”

IEEE approves 802.11n standard after six years

">
IEEE approves 802.11n standard after six years
December 3, 2021 · Uncategorized · (No comments)

Saturday, September 12, 2009

On Friday, the Institute of Electrical and Electronics Engineers (IEEE) ratified the next generation of Wi-Fi Alliance certification known as 802.11n. The path to ratification began on September 11, 2003 with 11 major drafts of the specification over the course of six years. Even though just approved, wireless devices have been available on the the market for over two years, running on what is known as “draft n” or “pre-N”.

The 802.11n standard operates on both the 2.4Ghz and 5.0Ghz frequencies. This will allow it to be backwards compatible with 802.11a, 802.11b and 802.11g, provided that the base station has dual radios. The speeds of 802.11n are substantially faster than that of its predecessors with a maximum theoretical throughput of 600Mbit/s.

Very few additions were made to the 802.11n draft standard over the last two years, so most if not all “draft n” hardware available on the market today is expected to be compatible with n-standard devices available in the future. In a similar process of the upgrade from “pre-G” to 802.11g, it is expected that most manufacturers of wireless hardware will release new firmware to bring all draft devices up to full standard compliance.

Retrieved from “https://en.wikinews.org/w/index.php?title=IEEE_approves_802.11n_standard_after_six_years&oldid=884050”