July 11, 2018 · Performing Arts · (No comments)

Top 10 Must-Have Tools for HVAC Engineers and Technicians


Rubber World IndustriesProducts and systems used across industries undergo design, development, maintenance, and repair. Along the process, engineers and technicians use a wide variety of tools, which does not only make the work easier and faster, but also allows the product or system to be in its best condition. Engineers and technicians in the heating, ventilation, and air conditioning (HVAC) industry have their share in using different kinds of tools. Listed below are the most commonly used tools in the HVAC industry: Battery-Powered DrillOne of the most important tools in this list is the drill because of its versatility. In the absence of a power outlet, it is preferred that the drill is powered by batteries for convenience.There are several uses for a battery-powered or cordless drill. But for HVAC products and systems, its application ranges from replacing the screwdriver, piloting holes before inserting the screw, to acting as a saw for cutting out holes.Electrical TesterSome would argue that there is nothing in HVAC that involves electricity. But this is definitely wrong, as many products and systems in HVAC work around live electrical power. That is why a multimeter should always be present in the toolbox of HVAC technicians to check electrical current in the products and systems they deal with. Reciprocating sawThis is a type of saw in which the cutting action is accomplished through a push and pull reciprocating motion of the blade. A reciprocating saw or sawzall is essential in HVAC because it saws just about anything depending on the blade put into it. Tape Measure Taking measurements are basic in any product or system for HVAC. For this, engineers and technicians in the industry are bound to keep a tape measure which should at least be 25 feet long. This is paired with a permanent marker for marking measurements. Screw drivers and nut drivers HVAC technicians have screw drivers and nut drivers in their toolbox for turning screws with slotted heads and tightening nuts and bolts, respectively. It should be ready in the toolbox in different sizes and types, and recommended to have insulated handles to ensure safety from electrical shock.Caulking GunA caulking gun is a tool that holds a tube or cartridge that is filled with material used for sealing up gaps and cracks. Dripless caulking guns work best to avoid a mess on the site. SnipsFor straight cutting sheet metal or even insulation sheets, snips or shears are used. Also called aviators, they are forged to stay sharp for a long time. There are different types of snips which depends on the cutting direction. Hand seamerHand seamers are used to bend or seam metal, straighten or hem edges, fabricate custom trim, create or modify flashings of any type. There is a lot of metal sheet work in HVAC jobs so this tool is essential.Tubing cutterTypically used in cutting the copper lines used in air conditioning systems, a tubing cutter is adjustable to fit various diameters of tubing or piping. They have a large grip knob for comfort during use.Refrigeration GaugesRefrigeration gauges are used to read the pressure of various liquids and gases in a cooling system, as well as vacuum pressure when testing or charging the device. It functions as a diagnosis and service tool. This list only provides ten essential tools in an HVAC technician’s toolbox. There are other equally important tools not mentioned. While the technicians are commonly using these tools and always have them prepared in their toolbox, it is also critical for HVAC engineers to have ample knowledge on the use of tools because of their importance in the application of HVAC products and systems. To know the tools and their functions as used in HVAC means a deeper understanding of the products and systems. On the part of the HVAC technicians, it’s not enough to use just any brand of these tools, but those that are proven to have high quality. It’s an investment for HVAC technicians to have durable and long-lasting tools, as buying cheap, easily breakable ones might just bring inconvenience on the job. At Rubber World Industries, an HVAC supplier specializing in rubber insulation and systems which is headquartered in the United Arab Emirates, the engineers and technicians are trained on the use of different HVAC tools. This is one of its secrets in manufacturing quality HVAC products and systems as well as providing topnotch service and support to its customers worldwide.

Rowena Lariosa

Rubber World IndustriesMarketing@gulfoflex.comTel: +971 6 7434176Website GulfoFlex.comMedia ContactAlyssa GonzagaMedia AccountLincoln Martin Strategic Marketing+971 50 4289684

Article Source:




February 18, 2018 · Performing Arts · (No comments)

Advantages of pursuing MBBS in Philippines



MBBS is one of the most coveted degrees in the world as it provides people an incredible opportunity to serve fellow humans by curing and saving their lives. This is one of the fundamental reasons why becoming a Doctor is often perceived as one of the noblest professions in the world. This fact serves as inspiration for millions of teenagers in India who aspire to pursue MBBS degree for themselves within as well as outside India. There are many countries which have emerged as destination of choice for MBBS aspirants and among them Philippines is one of the most preferred one. Philippines has some distinct advantages over other countries like Russia, US, UK, Australia, Nepal etc which has contributed to its meteoric rise Philippines as sought after country for MBBS aspirants.

Philippines was under colonial rule of Spain and later US for many decades. US colonial rule ensured that American education system made its inroads in the country. Today Philippines has more than 2000 higher medical institutions and 40 medical colleges and it is home to thousands of international students from around world, off which more than 50% are from India. MBBS in Philippines is structured similar to US and degree which is being offered is MD (much like US) which is equivalent to MBBS from India. This is degree is duly recognized by Medical Council of India (MCI) also. But yes after completion of this degree, Indian students would be required to pass the Foreign Medical Graduate Exam (FMGE) to start practising in India or to appear for post graduate entrance examinations.

Cost is another significant factor which comes into picture while pursuing higher professional education. And this factor works really well in favor of this South East Asian nation as overall tuition fee is approximately 15 lakhs rupees for entire course and other expenses come round 10 lakh rupees. Overall, degree comes home at a paltry amount of 25 Lakh rupees which is almost one fifth of the cost of pursuing the same in India. This factor makes the degree incredibly high value for money preposition. Besides this, since Philippines is a tropical country its spectrum of commonly occurring health issues and their causes is very similar to India. This comes as big boon for Indian students as after completion of the degree, it will be very convenient for them to start practising in India. Besides these factors, convenient availability of Indian food acts as blessing for Indian students which helps them in acclimatising well in the country. This will ensue that they can focus really well on studies and academic rigors. Philippines also boasts speaking population as it is the third largest English speaking nation in India with highest literacy rate. Patients who can converse in English boost the learning curve for students and help them in grabbing the fundamentals better.

Choice Overseas Education is one of the leading counselors in Mumbai for abroad study. They are also one of the leading study abroad consultants in Mumbai who help aspirants in pursuing MBBS degree overseas.

B-609, BSEL TECH PARK, Vashi, Navi Mumbai – 400 703,Indiainfo@choiceoverseas.in+91 22 2781 1843/449833378164www.choiceoverseas.in

Article Source: